4809 Liberty Ave, Vermilion, Ohio 44089Phone: 440-967-1634

Free delivery: Get free shipping on most orders over $175 with Salty Critter.
Stress-Free Returns: Return unused items within 30 days.
https://saltycritter.com/wp-content/uploads/2020/07/Trident-300x300.jpg
https://saltycritter.com/wp-content/uploads/2020/07/trident-alk-ca-300x245.jpg https://saltycritter.com/wp-content/uploads/2020/07/Fusion-Trident-tile-copy-211x300.jpg https://saltycritter.com/wp-content/uploads/2020/07/trident-with-bottles-copy-300x253.jpg

Neptune Trident Marine Aquarium Water Analyzer

$599.99

In Stock

This item must be used with a Neptune Apex controller with a 1Link or 24v power and Aquabus cable, it cannot be used stand alone.

The Trident is an automated testing system that regularly tests alkalinity, calcium, and magnesium in your saltwater aquarium — and then communicates this information to your Apex so you can get alerts, and change your dosing. When combined with the DOS (available separately) it creates a fully automated system for the proper dosing of supplements, maintaining them at consistent levels.

HOW IT WORKS

The Trident is a self contained automatic titration colorimeter. That’s quite a mouthful, for sure, so let’s state it as simply as we can. The Trident is basically automating what you (and top scientists) do already when you test your water, that is, perform a color changing titration and interpret the results.

On a scheduled basis the Trident carefully mixes its reagents with a small amount of sample water from your aquarium. While doing this, it is measuring (titrating with a precision peristaltic pump) the amounts of each that are necessary to reach an expected color change (determined by the electronic colorimeter). When it finishes the titration, it sends this sample/reagent fluid to your waste container. It then interprets the results of that test and logs the value into your Apex.

EASY PLUG AND PLAY SET UP

From the box to testing in under 15 minutes! Unlike other testing systems, there are no reagents to mix, tubes to cut, or pumps or probes to calibrate. Simply plug in one cable, two tubes, and run the setup task on the Apex Fusion mobile app — it holds your hand through the installation with helpful videos along the way.


FINALLY, TOSS ALL THOSE TEST KITS!
Syringes, vials, colors, endpoints, expiration dates — now a thing of the past for Alkalinity, Calcium, and Magnesium. Now, with zero effort, you get up to date values for Alkalinity, Calcium, and Magnesium — anywhere in the world!

AUTOMATED TESTING OF ALKALINITY, CALCIUM, AND MAGNESIUM
Using an automated titration method, with colormetric identification, the Trident automatically tests your aquarium water up to 24 times a day for Alkalinity, Calcium, and Magnesium.

INCREDIBLE PRECISION
The Trident tests consistently with a precision of +/- 0.05 dKh for Alkalinity and 15ppm for Calcium and Magnesium. Using any hobby-grade test kit on the market, even humans cannot perform the tests that consistently.

EASY, PLUG AND PLAY, 15-MINUTE SETUP
From the box to testing in under 10 minutes! Unlike other testing systems, there are no reagents to mix, tubes to cut, or pumps or probes to calibrate. Simply plug in one cable, two tubes, and run the setup task on the Apex Fusion mobile app — it holds your hand through the installation with helpful videos along the way.

EASY TO READ RESULTS AND GRAPHS
The peace of mind of having your recent tank parameters, right there in your pocket, from anywhere in the world.

HIGH/LOW ALERTS WHEN TANK IS OUT OF RANGE
Your Apex will alert you on your mobile device when test results fall out of the range you specify.

CONTROLS DOSING TO MAINTAIN MOST CONSISTENT LEVELS POSSIBLE
When the Trident is combined with the DOS system (sold separately), the two work in concert. Your Apex will use the data generated from Trident tests to automatically and safely adjust up or down your dosing amounts to keep your tank levels as stable as possible.

ONE MONTH’S REAGENT SUPPLY STORES NEATLY INSIDE
Convenient and clean, the Trident is self contained and when running the basic testing regimen only requires a reagent change once a month.

USES LESS THAN 7ML TANK WATER PER TEST
Some testing systems use as much as 100ml of your tank water for every test. This can cause fluctuations in tank salinity. With the minimal sample taken by the Trident, there will be almost no effect on your salinity. Unlike other solutions, potentially contaminated test water is never sent back into the aquarium. Instead, it is sent it to a waste container or drain.

INCREDIBLY QUIET!
The Trident is so quiet that our customers have said they rarely hear it – and when they do hear the quiet little chirps they are pleased to know that new test numbers are coming soon and they never had to pull out a test kit!

SIMPLE, INFREQUENT REAGENT CHANGES
When using the default testing schedule of four (4) alkalinity, two (2) calcium, and two (2) magnesium tests a day, the reagent stored inside the Apex will last a full month. And adding new reagent is super simple — just slide out the drawer, remove the old bottle(s), and replace them with new ones. If you desire, you can also run a calibration with the included calibration standard.


HIGHLIGHTED FEATURES:

  • Automatically tests seawater for Alkalinity, Calcium, and MagnesiumUp to 24
  • Alkalinity tests per day with +/-.05 dKh precision
  • Up to 12 Calcium tests per day with +/-15 ppm precision
  • Up to 12 Magnesium tests per day with +/-15 ppm precision
  • ~7.9ml sample water used per parameter tested
  • ~7 minutes testing time per parameter tested
  • Up to one month of testing before reagents need changing based on base level testing of 4-Alk, 2-Ca, 2-Mg per day.
  • When combined with DŌS system (available seperately), the data from Trident can be used to automatically raise or lower the amount of additives dosed as necessary to maintain stability at user set point.
  • Wide range for measurements:
    Alkalinity 5.0 – 15.0 dKH
    Calcium 250 – 875 ppm
    Magnesium 850 – 1950 ppm

REQUIRES:

  • Apex or ApexEL (not Apex Classic, Lite, or Jr.)
  • Available 1Link port OR 24v power supply and Aquabus Cable (available separately)
  • External waste container or drain
  • Must be located within 4’ of water source to be tested

INCLUDES:

  • Trident
  • 1Link cable (US/CAN only)
  • 5′ of black sample line tubing
  • 5′ of clear waste line tubing
  • 1-month reagent supply
  • Calibration Fluid
  • Get Started Card

0 reviews for Neptune Trident Marine Aquarium Water Analyzer

There are no reviews yet.

ADD YOUR REVIEW

Your email address will not be published. Required fields are marked *

Sign up to Newsletter