Maxspect XF280 Gyre Pump Only (Slave – with power supply) – 6000gph
Gyre XF-280 slave pump – requires a master pump, controller, and power supply to operate
The Maxspect Gyre is the world’s first “gyre”- generating water moving device for aquariums. Compared to traditional powerheads and wavemakers that are based on propeller nozzle flow technology, the Maxspect Gyre is based on advanced crossflow technology which produces massive horizontal water movement leaving little to no deadspots in its wake.
Gyre XF-280 Pump Specifications
Dimensions (LxWxH):14.8″ x 3.8″ x 2″
Max Flow Rate: 6,000gph
Power Consumption: 10w-80w
Ideal for Aquariums: 200 -1000gal
Applicable for glass or acrylic aquariums up to 1.25 in.
Gyre Pump with Magnet Mount, Power Supply, Spare Rotors, Snail Screens, and Cages.
Power Supply Unit
Input Voltage / Current: 100-240V ~ 50/60Hz 2.5A
Output Voltage / Current: 24vDC 4A
Weight: 300g /0.7 lb
Cable Length:10ft controller to pump), 5ft (power supply to controller)
*Specifications are subject to change without notice. Weight and dimensions are approximate.
12 Months Limited Warranty
Why gyre generator and not wavemaker?
Wavemakers excel in making waves, while waves are spectacular to watch in motion, they are in fact moving the majority of the water vertically up and down, with relatively low horizontal movement, especially near the bottom of the aquarium.
On the other hand, gyre generators excel in moving sheer flow of water from one side of the aquarium to the other. The sheer flow of water is so strong that i would bounce back from the opposite site to achieve full circulation within an aquarium, ie. generating “gyre flows”.
A) Virtually no dead spots
B) Evenly distributed flow rate throughout the entire aquarium
C) Water bounces back from the other side to create a full circulation, ie. generating “gyre flows”