Tunze Magnet Holders - 6025.50, 6080.50, 6200.50, 6065.50, and 6205.50 - Salty Critter

Tunze Magnet Holders


		TUNZE® Magnet Holder 6080.50 and 6200.50 are used to attach all Turbelle® pumps and Comline components. This patented holding device has a very high holding power, and can be used to attach all other TUNZE® devices to the aquarium pane as well, provided the sliding unit of the standard clamp-type holder is used. The Magnet Holder consists of a two-part magnetic shaped part. The inside unit is placed in the water and the external unit is attached to the outside of the aquarium; both parts are identical in shape. Within a short period of time, the inside unit with the sliding unit for the pump or the Comline components can be positioned on the inside glass pane. Subsequently, the external unit has to be attached to the same position on the glass pane from the outside. On account of their encapsulated construction, the Magnet Holder is resistant to corrosion, and causes no harmful effects for the aquarium biotope.
Tunze 6080.50 magnet holder for glass or acrylic up to .47 inches			Tunze 6200.50 magnet holder for glass or acrylic up to .74 inches

	Model	Price	Buy
	Tunze 6080.500 magnet holder	59.05
	Tunze 6200.500 magnet holder	94.32


Tunze 6065.515 and 6105.515 magnet holder for glass or acrylic up to .6 inches.	Tunze 6205.500 magnet holder for glass or acrylic up to 1.06 inches.

	Model	Price	Buy
	Tunze 6065.515 magnet holder	34.33
	Tunze 6065.515 magnet holder	43.04
	Tunze 6205.500 magnet holder	121.39


		TUNZE Nano Magnet Holder TUNZE® Nano Magnet Holder 6025.50 is used to mount Turbelle® nanostream®, but it can also be used perfectly well as a universal holder. Like the larger models 6080.50 and 6200.50, this patented holder has a very high holding power and can be fitted to every aquarium pane. The Nano Magnet Holder consists of a two-part magnetic shaped part. The inside unit is placed in the water and the external unit is attached to the outside of the aquarium; both parts are identical in shape. On account of its encapsulated construction, the Nano Magnet Holder is resistant to corrosion, and causes no harmful effects for the aquarium biotope. Supplied with two screws and M5x40 nuts, two cable fasteners, and 100 mm (3.9 in.) of hook-and-loop strip suitable especially for installation in water. Dimensions: diam. 50 x W 15 mm (.59 in.).

	Model	Price	Buy
	Tunze 6025.500 magnet holder	39.56


		TUNZE Osmolator Sensor Magnet Holder for 2 sensors 3155.600

	Model	Price	Buy
	Tunze 3155.600 magnet holder	31.37

Copyright© 2003-2011 Salty Critter
All Rights Reserved

Site Meter