SpectraPure’s Dual MaxCap DI™ System comes with:
- 2-Position Housing & Mounting Bracket
- MaxCap DI ™ Cartridge
- SilicaBuster ™ DI Cartridge
- Dual-Probe TDS Meter (Determines when the MaxCap DI TM Cartridge is exhausted. When the output TDS exceeds 75% of the input TDS,change the Cartridge.)
- Universal Filter Wrench
- Retail-Ready Package
MaxCap D2 Dual Stage DI Add-on
Everything you need to add a dual stage DI to your existing RO system. SpectraPure, Inc.® Revolutionary MaxCap DI ™ cartridge has over 3 times more capacity than any other Mixed-Bed or Hi-Silica removal deionizing cartridge. Install after your existing RO system to remove any unwanted algae growth in your aquarium. This incredible break-through in DI cartridge technology will enable you to produce DI water at less than half of any other dual stage DI systems.
In many applications, the MAXCAP DI™ (DI-MC-10) is installed up-stream of a Mixed-Bed or Hi-Silica removal cartridge. For example, if the RO water entering the MAXCAP DI™ has 20 ppm TDS (Total Dissolved Solids), the original DI cartridge may process about 400 gallons of pure DI water. By placing a MAXCAP DI™ cartridge in front of the original cartridge, 1200 gallons of water will pass through both cartridges before the MAXCAP DI™ is exhausted. The original DI cartridge will be only one-third exhausted. A second MAXCAP DI™ will process another 1200 gallons and the original cartridge will now be two-thirds exhausted. Only after a third MAXCAP DI™ cartridge processes another 1200 gallons will the original cartridge finally become fully exhausted.
That's 3600 gallons purified with only 4 (3 MAXCAP DI™ + 1 Mixed-Bed) cartridges, not 9 (9 x 400 = 3600).