Constant Speed Mode - Pump runs continuously at a constant speed which can be set by the user.
EcoSmart Nutrient Transport Mode (NTM) - A two phase program to promote maximum health and nutrient export, as well as increased growth for corals. Alternates between a resonant standing wave and a surge effect to stir up and export nutrients.
EcoSmart Tidal Swell Mode (TSM) - Creates a harmonic balance in your aquarium reminiscent of the changing flow conditions that would be found in nature. Flow varies from left to right, right to left, calm, and ends with a great surge.
Reef Crest Random Mode - Reef Crest Random Mode simulates the high-energy conditions of a natural reef crest environment.
Lagoonal Random Mode - Simulates the gentler reef zone found in a natural lagoon.
Short Pulse Mode - Allows for wave pulse timings between 0.3 and two seconds, enabling the creation of FAST alternating flow throughout the tank. Use this mode to create a resonant standing wave.
Tidal Swell Mode - Creates a harmonic balance reminiscent of the changing flow conditionis found in nature. Over several hours the flow will go from very chaotic to calm followed by a detritus clearing surge.
Feed Mode - Slows down pump to allow user to feed aquarium. User can select the duration and speed for Feed Mode.
Night Mode - Automatically reduce speed and operates continuously at that speed for a period of time during the night. User can select the duration and speed for Night Mode.
Wave Auto Tune Mode - Create a standing wave in your aquarium.
Battery Backup Mode - When used with our battery backup accessory, the VorTech pump will switch to Battery Backup Mode in the event of a power outage and will operate at a user set speed. The LED’s on your EcoSmart driver will count down to indicate how much power is available within the battery.
Auto-Dim - LED’s are turned off and display knob dimmed significantly, but pump functions in its current mode. User can program how long after use before the driver enters Auto-Dim.
On/Off Switch - Tap the on/off switch to turn off and turn on a pump. Hold this button to turn off all pumps in a master/slave group. Tap any pump in the groups’ on/off switch and that pump will turn back on.
Specifications
Flow: 200 to 1500 gph (750 – 6000+ lph)
Wattage: 8 to 18 watts
Maximum Tank Thickness: 3/8″ (9.5mm)
Appropriate Tank Size Range: 2.5 to 50 gal (9.5 – 190L)
Dimensions: Wet Side- 2.5″ diameter by 1.5″ long (63.5mm x 38.1mm),
Dry Side – 2.5″ diameter by 2″ long (63.5mm x 50.8mm)
Clearance Needed Behind Aquarium: 2.25″ (57mm)
